To Next PageTo Next Page
Need help?Do you have a question about the LG MU5R40 and is the answer not in the manual?
General| Refrigerant | R410A |
|---|---|
| Power Supply | 220-240V, 50Hz |
| Number of Connectable Indoor Units | Up to 5 |
| Type | Multi Split |
| Cooling Capacity | 40000 BTU |
| Outdoor Unit Noise Level | 54 dB(A) |
Essential safety guidelines for installation work and procedures.
Critical safety advice for operating the air conditioner correctly and safely.
Details included installation parts and required clearance specifications for optimal performance.
Guidance on selecting the best site for the outdoor unit, considering airflow and environment.
Specific advice for installing the outdoor unit on a rooftop structure, ensuring stability and leveling.
Specifies maximum piping length and elevation differences allowed for the system.
Instructions on calculating additional refrigerant charge based on piping length.
Detailed steps for preparing and flaring copper pipes to ensure leak-free connections.
Instructions for connecting refrigerant pipes to the outdoor unit using correct torque specifications.
Procedures for connecting the power cable and wiring to the indoor unit's control board.
Steps for connecting the power cable to the outdoor unit, including circuit breaker requirements.
Guidelines for safe and correct power wiring, emphasizing terminal connections and avoiding heat.
Methods for shaping, securing, and routing refrigerant piping and drain hoses for proper function.
Procedures for removing air and moisture from the system and performing essential leak tests.
Steps for achieving the required vacuum level and completing the refrigerant system setup.
Specific instructions for installing the PI485 PCB on different capacity models.
How to conduct a test run and check key performance indicators like refrigerant pressure and air temperature.
Configuration of various operational modes and features using DIP switches.
Procedures for activating forced cooling and checking wiring correctness using LEDs.
Instructions for enabling and configuring the saving power consumption feature for efficiency.
Configuration options for locking operation modes and activating night quiet mode.
Further configurations for mode lock, combined with night quiet or power saving modes.
Guidelines for determining the maximum number and capacity of indoor units connectable to an outdoor unit.
Recommendations for installing units in coastal areas to prevent corrosion from sea wind.
Advice for winter installation and information on airborne noise emission levels.
Explains the meaning of various codes in the product model numbers.
