To Next PageTo Next Page
Need help?Do you have a question about the LG FLEX MULTI SPLIT and is the answer not in the manual?
General| Brand | LG |
|---|---|
| Model | FLEX MULTI SPLIT |
| Category | Air Conditioner |
| Language | English |
Lists the components included with the air conditioner unit for installation.
Provides an overview of the indoor and outdoor units of the air conditioner system.
Outlines critical safety warnings and cautions for installation and operation to prevent injury or damage.
Details steps and considerations for selecting the best location for both indoor and outdoor units.
Guidelines for installing the unit in seaside environments to prevent corrosion.
Specifies the maximum allowable piping lengths and elevation differences between indoor and outdoor units.
Guides on how to properly connect refrigerant pipes and drain hoses for indoor units.
Instructions for mounting the indoor unit installation plate securely on the wall.
Explains how to connect the electrical wires to the indoor unit's terminal board.
Details the process of connecting the conduit bracket and cable to the indoor unit.
Provides dimensions and guidelines for installing ceiling-mounted indoor units.
Steps for installing the optional wired remote controller and its cable.
Explains the function of various switches on the wired remote controller for configuration.
Describes how to perform a trial operation to check installation status after setup.
Instructions on how to switch the temperature display unit between Celsius and Fahrenheit.
Guides on setting the address for central control systems to recognize indoor units.
Details the Electronic Static Pressure (ESP) function for adjusting fan speed volume.
Instructions for fitting and installing the decorative panel onto the indoor unit.
Guidelines for correctly installing the drain hose for optimal drainage and preventing leaks.
Comprehensive guide on flaring copper tubes and connecting refrigerant pipes to prevent leaks.
Instructions for installing the main unit, covering both ceiling-suspended and wall-mounted types.
Detailed steps for connecting electrical cables between all units in the system.
Provides an example and instructions for connecting cables to terminals, ensuring secure connections.
Steps for checking drainage, insulating pipes, and special piping considerations for unit installation.
Instructions for configuring the unit when long refrigerant piping is used.
Procedures for removing air and moisture from the refrigerant system before operation.
Detailed steps for performing the vacuum evacuation process on the refrigerant system.
Guidelines for charging the refrigerant system, including calculations for additional refrigerant.
Tables showing which indoor units are compatible with different outdoor unit capacities.
