Need help?Do you have a question about the LG Multi F MAX PMBD3640 and is the answer not in the manual?
General| Model | PMBD3640 |
|---|---|
| Cooling Capacity | 36, 000 BTU/h |
| Heating Capacity | 40, 000 BTU/h |
| Refrigerant | R410A |
| Type | Multi-Split Air Conditioner |
| Energy Efficiency Ratio (EER) | 3.20 |
| EER (Cooling) | 3.20 |
| Indoor Units Compatibility | Compatible with LG indoor units |
| Operating Temperature (Cooling) | -10°C to 46°C |
| Operating Temperature (Heating) | -25°C to 24°C |
Covers installation safety precautions and warnings for the outdoor unit.
Outlines electrical safety instructions and warnings for wiring the system components.
Details safety precautions to follow during the operation and maintenance of the unit.
Presents electrical data including voltage, current, and power ratings for the units.
Discusses the characteristics and properties of R410A refrigerant for the system.
Provides guidance on selecting the optimal location for outdoor unit installation.
Specifies required clearances for service access and airflow around the outdoor unit.
Guides on selecting appropriate locations for installing branch distribution units.
Specifies maximum allowable piping lengths and elevation differences for system design.
Details piping connection procedures for Multi F MAX outdoor units to indoor units.
Guides on connecting indoor units to branch distribution units in Multi F MAX systems.
Explains the process of flushing refrigerant piping with nitrogen gas for cleaning.
Describes the steps for performing a leak test on the refrigerant system.
Details the vacuum drying procedure to remove moisture and non-condensable gases.
Provides instructions for calculating and charging the correct amount of refrigerant.
Specifies insulation requirements for refrigerant piping to prevent heat loss/gain.
Guides on performing a test run to verify system operation and performance.
Lists and explains error codes for indoor and outdoor units to aid in troubleshooting.
To Next Page