To Next PageTo Next Page
Need help?Do you have a question about the LG Multi V System and is the answer not in the manual?
General| Type | Variable Refrigerant Flow (VRF) |
|---|---|
| Refrigerant | R410A |
| Control Type | Centralized control |
| Energy Efficiency | High energy efficiency |
| Indoor Units Compatibility | Compatible with various indoor unit types (e.g., ceiling cassette, wall-mounted, ducted) |
Key safety guidelines for installing the air conditioner unit.
Ensures safe electrical connections and operation of the air conditioner.
Precautions for safe operation and handling of the air conditioner.
Warnings about environmental risks and operational hazards.
Guidelines for proper product usage, handling, and installation location.
Safety instructions for maintenance, cleaning, and battery handling.
Explains warning and notice symbols used throughout the installation manual.
Illustrates the key components and airflow paths of the indoor unit.
Lists and illustrates the necessary parts for installing the indoor unit.
Provides diagrams showing required clearances for ceiling and wall mounting.
Guidelines for selecting the optimal location for the indoor unit installation.
Steps for preparing the unit, including opening the front panel and connecting the drain hose.
Step-by-step guide for mounting the installation plate on the wall.
Detailed instructions for securing the unit using anchor nuts and bolts for ceiling mounting.
Illustrates correct and incorrect methods for bending refrigerant piping to prevent damage.
Instructions on how to check the drainage system for proper water flow and leaks.
Guide for reassembling the front panel after installation.
Instructions for connecting electrical wires to the unit's terminal block.
Detailed steps for connecting the wired remote controller cable and mounting the board.
How to connect the indoor unit to the remote controller and use extension cables.
Configuration options for the two-thermistor system in the wired remote controller.
Guide to configuring the unit's functions using dip switches.
How to configure group control for multiple indoor units with one controller.
Configuration for group control using multiple controllers and indoor units.
Setup for connecting two wired remote controllers to a single indoor unit.
