To Next PageTo Next Page
Need help?Do you have a question about the LG MU2R15 and is the answer not in the manual?
General| Brand | LG |
|---|---|
| Model | MU2R15 |
| Category | Air Conditioner |
| Language | English |
Essential safety precautions, warnings, and cautions for operating the appliance.
Specific safety instructions related to the installation process.
Safety guidelines to follow during the operation of the air conditioner.
Lists installation parts and specifies required clearance for the unit.
Guides on selecting the best location and rooftop installation for the outdoor unit.
Specifies minimum floor area based on refrigerant charge and installation type per IEC standards.
Details on piping length, elevation, and calculating additional refrigerant charge.
Procedures for preparing copper pipes and performing correct flaring.
Steps for connecting refrigerant piping to the outdoor unit with correct torque.
Instructions for connecting wiring to the indoor unit's control board.
Steps for connecting wiring to the outdoor unit's control board.
Guidelines for safe and correct power wiring installation.
Methods for taping and securing refrigerant piping during outdoor installation.
Steps for checking connections and performing a leakage test using nitrogen gas.
Details on vacuum pump evacuation and final steps for system sealing.
Instructions for installing the PI485 PCB, referencing a separate manual.
How to prepare the remote control for operation.
Procedures for evaluating unit performance during a test run.
Explains DIP switch settings for various functions like cooling, power saving, and quiet modes.
Details on Forced Cooling, Wiring Error Check, Saving Power Consumption, and Night Quiet Mode.
Configurations for locking operation modes and combining with other functions.
Guidelines for selecting compatible indoor and outdoor unit combinations and calculation methods.
Guidance on choosing an outdoor unit location near the sea and using windbreaks.
Advice for operating the unit safely during winter conditions.
Decoding the naming convention for indoor and outdoor unit models.
Information on sound pressure levels and factors affecting exposure.
