1-9
Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
• DVD USB DOWN LOAD GUIDE
The program file to download should be named as BANK30.ROM.
- The downloaded file should be modified as BANK30.ROM to use.
- At some PCs with the security program (Water Wall) installed, store BANK30.ROM at the USB
device, disable the security protection, and download it to the set.
- After safely storing BANK30. ROM at the USB device, perform the following steps.
Note) Do not perform any other work such as disconnecting the USB device, switching to the
other Function and turning off the power while downloading it to the set.
1. When the USB device is inserted at the USB functiona after a while TV screen is displayed on the
as following figure.
2. When downloading is completed, the message “Completed” is displayed at the top left of the TV screen
as shown at Figure(1).
If the message “NO USB” is displayed as shown at Figure(2), downloading is completed.
FIG.1
FIG.2
To Next Page
Loading...
