System Setting 19
System Setting
3
Audio
2.1 Speaker Setup
Make the following settings for the built-in 5.1
channel surrounds decoder.
1. Select [2.1 Speaker Setup] on the [Audio] menu.
2. Press ENTER.
The [2.1 SPEAKER] appears.
3. Use
A/D
to select the desired speaker.
4. Adjust options using
W/S/A/D
buttons.
5. Returns to the previous menu by pressing
RETURN.
[Speaker]
Select a speaker that you want to adjust.
Certain speaker settings are prohibited by the
Dolby Digital licensing agreement.
,
Note
[Size]
Since the speaker settings are xed, you cannot
change the settings.
[Volume]
Adjust the output level of each speaker.
[Distance]
Adjust the distance between each
speaker and the listening position.
[Speaker Test Start]
Select [Speaker Test Start] by using the
W/S
and press
ENTER
. Press
ENTER
again
to stop. Adjust the volume to match the
volume of test signals memorized in the
system.
MBT506-A0P_DIDNLLK_ENG_0727.indd 19 2011-11-30 �� 2:58:51
To Next Page
Loading...
