Operating 25
Operating
4
y
An error message “CHECK” or “Connected
iPod model is not supported.” appears when:
-
your iPod is not available for the function
to be operated.
y
An error message “CHECK” or “Please update
iPod’s software.” appears when:
-
your iPod has an old software version.
/
Update your iPod software to latest
version.
y
If this unit displays an error message, follow
the message. An error message “CHECK” or
“Please check your iPod.” appears when:
-
the communication between this unit
and your iPod is failed.
/
Undock & re-dock your iPod in this unit.
-
your iPod is not connected rmly.
-
this unit recognises your iPod as
unknown device.
-
your iPod is exceptionally low on power.
/
The battery needs to be charged.
/
If you charge the battery while iPod
is extremely low in power, it may take
longer to charge.
y
Compatibility with your iPod may vary
depending on the type of your iPod.
y
iPod touch and iPhone have any dierence
in operation other than iPod. You may need
any additional control to use them with this
unit. (e.g. “slide to unlock”)
y
If you use an application, make a call, or
send and receive SMS text message, etc. on
iPod touch or iPhone, disconnect it from
iPod dock of this unit and then use it.
y
Depending on your iPod’s software version,
it may not be possible to control your iPod
from this unit. We recommend installing the
latest software version.
y
The video quality depends on the video
sources on your iPod.
y
If you have a problem with your iPod, please
visit www.apple.com/support/ipod.
,
Note
Enjoying iPod on the screen
1. Connect the iPod rmly.
2. Press [Music] or [Movie].
If you connected the other device
(CD or USB), select the iPod on the menu and
ENTER.
3. Select a content using
W/S/A/D
, and press
ENTER..
Moving to the previous or
next le list.
4. Operate iPod.
Refer to basic operation section.
The controls on your iPod are not operational
in this mode.
,
Note
MBT506-A0P_DIDNLLK_ENG_0727.indd 25 2011-11-30 �� 2:58:52
To Next Page
Loading...
