Why LG MH2044DB Microwave Oven seems to be operation but little heat is produced?
If your LG Microwave Oven seems to be operating but little heat is produced, it may be due to a power source voltage lower than 90%. Contact your local electric power utility company or a qualified electrician.
What to do if LG MH2044DB display is on but doesn't start?
If your LG Microwave Oven display shows all figures set, but the oven does not start cooking when the START pad is touched, the secondary switch may be defective and needs replacement.
LG MH2044DB Microwave Oven seems to be operation but no heat is produced in Micro Mode, why?
If your LG Microwave Oven seems to be operating but no heat is produced in Micro Mode, you may need to replace the defective part MGT/HVC/HVD and then replace HV Fuse.
Why LG Microwave Oven does not cook properly on set power level?
If your LG Microwave Oven is not cooking properly when programmed for the set power level, it could be due to a defective P.C.B. assembly that needs replacement.
What to do if sparks occur in LG MH2044DB?
If sparks occur while using your LG Microwave Oven, stop using metallic ware or cookware with metallic trimming. Only use microwave-safe cookware as indicated in the cooking guide.
Why LG MH2044DB turntable drags or makes noise?
If your LG Microwave Oven's turntable drags or makes noise, ensure the food is evenly distributed and reduce the portion size or use lighter cookware.
Why LG Microwave Oven has no microwave oscillation?
If your LG Microwave Oven has no microwave oscillation, even though the oven lamp and fan motor run, it may be due to a defective P.C.B assembly, high voltage capacitor, high voltage diode, or magnetron. These parts may need to be replaced.
Why LG MH2044DB output power is too low?
If the output power of your LG Microwave Oven is too low, ensure that you are using the microwave oven at an adequate line voltage.
General| Brand | LG |
|---|---|
| Model | MH2044DB |
| Category | Microwave Oven |
| Language | English |
To Next Page
