LG MJ18PC - Page 26

26
OPERATION
3 Press the JET MODE button.
•
Jet Cooling Mode
Strong cool air blows out for 30 minutes.
After 30 minutes, the temperature is
maintained at 18
7 by default.
- To change the temperature, press the a
or
b button to set the desired
temperature.
•
Jet Heating Mode
Strong warm air blows out for 30 minutes.
After 30 minutes, the temperature is
maintained at 30
7 by default.
- To change the temperature, press the
a
or
b button to set the desired
temperature.
NOTE
• Press the JET MODE or FAN SPEED or a or b
button to cancel the Jet mode.
Adjusting the Fan Speed
You can adjust the fan speed in 5 steps.
• Press the
FAN SPEED button repeatedly to select
the desired fan speed.
NOTE
• The Natural Wind fan speed setting adjusts the
speed automatically.
• The indoor unit icons are displayed on some
indoor units.
• The indoor unit display shows the fan speed
icons for only 5 seconds and returns to the set
temperature.
Adjusting the Airflow Direction
You can adjust the direction of the airflow vertically
or horizontally.
Adjusting the Up-Down Direction
• Press the SWING (Up-Down Swing) button
repeatedly to adjust airflow direction.
Speed
Wireless
Remote
Control Icon
Indoor Unit
Icon
High
Fs
Medium -
High
F4
Medium
F3
Medium - Low
Fz
Low
F1
Natural Wind -