To Next PageTo Next Page
Need help?Do you have a question about the LG MC12AHR and is the answer not in the manual?
General| Type | Split system |
|---|---|
| Cooling capacity (max) | 12000 BTU/h |
| Dehumidifying capacity | 1.5 l/h |
| Heating capacity (max) | 13200 BTU/h |
| Air conditioner functions | cooling, heating |
| Cooling capacity in watts (max) | 3520 W |
| Heating capacity in watts (max) | 3870 W |
| Indoor unit type | Wall-mountable |
| Airflow | 600 m³/h |
| Noise level | 35 dB |
Weight and Dimensions| Weight | 9500 g |
|---|---|
| Dimensions (WxDxH) | 915 x 165 x 282 mm |
Guidance on choosing optimal indoor and outdoor unit placement, considering heat, obstacles, and noise.
Detailed steps for cutting pipes, removing burrs, and performing flaring for leak-free connections.
Steps for connecting indoor unit piping and drain hose, including routing and insulation.
Instructions for connecting piping to the outdoor unit, including tightening flare nuts.
Steps for connecting the power and communication cables to the indoor unit terminals.
Procedures for connecting cables to the outdoor unit's control board and power supply.
Steps for preparing the system and performing a leakage test with nitrogen gas.
Procedure for removing air and moisture from the refrigerant system using a vacuum pump.
Steps to check system refrigerant charge and performance after installation.
