LG MJ18PC - Page 30

30
OPERATION
4 Press the SET/CANCEL button to stop the icon
from flashing.
• The
Sleep function icon is displayed on the
display screen.
NOTE
• 1H is displayed on some indoor units.
• Indoor unit display shows the set time from 1H
to 7H for only 5 seconds and then returns to the
set temperature.
• In the
Cooling and Dehumidification mode, the
temperature increases by 1
7 after 30 minutes
and an additional 1
7 after another 30 minutes
for a more comfortable sleep. The temperature
increases up to 2
7 from the preset
temperature.
• Although the remark for fan speed on the
display screen may be changed, the fan speed is
adjusted automatically.
Light Off Function (On Some
Models)
You can set the brightness of the indoor unit
display screen.
• Press the
LIGHT OFF button.
NOTE
• The button turns the display screen on or off.
• If the brightness of an indoor unit's display is set
to off, pressing a button on the wireless remote
control automatically turns the display on for a
while.
• This function may operate differently depending
on the model.
Energy Control Function (On
Some Models)
You can decrease the power input.
1 Turn the appliance on.
2 Press the ENERGY CTRL. (Energy Control)
button repeatedly to select the desired step.
NOTE
• 8O , 6O , 4O or L (1step), LL (2step) is displayed on
some indoor units.
Step
Display
Screen
Description
1
The power input is
decreased by 20%
compared to rated
power input.
2
The power input is
decreased by 40%
compared to rated
power input.
3
(on some
models)
The power input is
decreased by 60%
compared to rated
power input.