Heat Pump
60Hz/R410A _ 1
1. Multiple piping type MULTI F
Part 2 Product data_Outdoor units
1.1 Power supply
External wiring procedure
- The power supply work is needed only to the outdoor unit. The power supply to the indoor unit is conducted through the
transmission wiring. Therefore, the power supply work can be carried out at just one place of the outdoor unit. It will
contribute to simplify the work procedure and to save cost.
- Wiring cable size must comply with the applicable local and national code.
Type Outdoor unit Capacity[kBtu/h(kW)]
Circuit breaker capacity
Power supply
Heat Pump
A2UW16GFA0 16.0 (4.69) 15A
220 V, 1 Ø, 60 Hz
A3UW21GFA0 21.0 (6.15) 20A
A5UW30GFA0 30.0 (8.79) 25A
A5UW40GFA0 38.2 (11.2) 30A
To Next Page
Loading...
