3.9.6 Mode Lock
Setting Procedure
1. Set the Dip Switch as follow after shutting the power source down.
2. Reset the power.
Mode Lock with Night Quiet Mode
Mode Lock (Cooling) + Night
Quiet Mode (step 1)
Mode Lock (Cooling) + Night
Quiet Mode (step 2)
Mode Lock (Cooling) + Saving
Power Consumption (step 1)
Mode Lock (Heating) + Saving
Power Consumption (step 1)
Mode Lock (Cooling) + Saving
Power Consumption (step 2)
Mode Lock (Heating) + Saving
Power Consumption (step 2)
Only Cooling Mode Only Heating Mode
57 _
Heat pump
60Hz/R410A
3. Installation of outdoor unit
Part 3 Design and installation
To Next Page
Loading...
Need help?
General
