Heat pump
50Hz/R410A _ 68
3. Installation of outdoor unit
Part 3 Design and installation
3.10.6 Mode Lock
Setting Procedure
1. Set the Dip Switch as follow after shutting the power source down.
2. Reset the power.
Mode Lock with Night Quiet Mode
Mode Lock (Cooling) + Night
Quiet Mode (step 1)
Mode Lock (Cooling) + Night
Quiet Mode (step 2)
Mode Lock (Cooling) + Saving
Power Consumption (step 1)
Mode Lock (Heating) + Saving
Power Consumption (step 1)
Mode Lock (Cooling) + Saving
Power Consumption (step 2)
Mode Lock (Heating) + Saving
Power Consumption (step 2)
Only Cooling Mode Only Heating Mode
To Next Page
Loading...
Need help?
General
