To Next PageTo Next Page
Need help?Do you have a question about the LG Multi V ARNU243M2A4 and is the answer not in the manual?
General| Model Number | ARNU243M2A4 |
|---|---|
| Refrigerant | R410A |
| Cooling Capacity | 24, 000 BTU/h |
| Heating Capacity | 27, 000 BTU/h |
| Power Supply | 208/230V, 60Hz |
| Compressor Type | Scroll |
| Indoor Unit Compatibility | Multi V |
| Cooling Capacity (BTU/h) | 24, 000 |
| Power Supply (Alternative) | 208/230V, 60Hz |
| Indoor Unit Dimensions (W x H x D) | Varies by model |
| Indoor Unit Weight | Varies by model |
Covers critical safety precautions and warnings for unit installation.
Provides additional safety guidelines and precautions for the installation phase.
Details safety instructions and precautions related to electrical wiring and connections.
Outlines safety guidelines to prevent hazards during unit operation.
Guides on choosing an appropriate installation location based on safety and operational factors.
Step-by-step guide for installing the main chassis of ducted indoor units.
Details on preparing the unit's location, mounting, and duct connections.
Explains the wiring connections required for the vertical conversion kit on MA chassis units.
Covers the procedures and considerations for connecting refrigerant piping to indoor units.
Outlines steps for preparing refrigerant pipes and creating proper flare fittings.
Details safety information regarding refrigerant and proper brazing techniques.
Specifies requirements for power supply and wiring installation.
Step-by-step guide for connecting the unit's power wiring.
Illustrates the wiring connections for the B8 chassis.
Illustrates the wiring connections for the M2 chassis.
Illustrates the wiring connections for the M3 chassis.
Illustrates the wiring connections for the MA chassis.
Illustrates the wiring connections for the M1 chassis.
Illustrates the wiring connections for the L1 chassis.
Illustrates the wiring connections for the L2/L3 chassis.
Illustrates the wiring connections for the NJ chassis.
Illustrates the wiring connections for the NK chassis.
