Operating18
Operating
3
Other operations
Turn off the sound temporarily
You can mute your unit, for example, to answer the
telephone.
Press
i
on the remote control. Red LED blinks and
there is no sound on the unit.
To cancel it, press
i
again on the remote control
or change the volume level.
Adjust the woofer level
settings
You can adjust the sound level of the wireless
subwoofer. Press WOOFER LEVEL
o/p
on the
remote control.
If the woofer level reached a minimum or a
maximum, the red LED on the sound bar is lit
up when you adjust the woofer level of the
wireless subwoofer.
,
Note
3D Sound effect
3D Sound features deliver sound creating a
wider spot so you can enjoy more immersive and
cinematic surround sound.
Turn on or o 3D Sound eect by using 3D SOUND
ON/OFF on the remote control.
DRC (Dynamic range control)
Make the sound clear when you feel the volume is
too low.
Turn on or o DRC by using DRC ON/OFF on the
remote control.
Auto power down
This unit will turn itself o to save electric
consumption in the case were main unit is not
connected to external device and is not used for 25
minutes.
But the unit can turns on automatically based on
the [AUTO POWER] function you've set.
NB5530A-NB_DGBRLLK_ENG.indd 18 2013-06-20 9:18:08
To Next Page
Loading...
