LG NS9550F User Manual

Operating
31
Operating
3
y
You can check the recording percentage
rate for the USB record on the display
window during the recording. (MP3/WMA,
CD Only)
y
During recording MP3/WMA, there is no
sound.
y
For stable recording, the output sound level
goes down on its own when you record
music from CD to USB.
y
You can only change volume level between
MIN and 10 during recording. (Only CD
function)
y
When you stop recording during playback,
the le that has been recorded at that time
will be stored. (Except MP3/WMA les)
y
Do not remove the USB device or turn o
the unit during USB recording. If does not,
an incomplete le may be made and not
deleted on PC.
y
If USB recording does not work, the
message like “NO USB”, “ERROR”, “USB FULL”
or “NO REC” is displayed on the display
window.
y
Multi card reader device or External HDD
can not be used for USB recording.
y
A le is recorded by about 512 Mbyte when
you record for a long term.
,
Note
y
You can record various sound using DJ
EFFECT or SCRATCH Eect. (Except USB
Copying)
y
You can control recorded MIC sound
according to MIC volume.
y
You may not store more than 2000 les.
y
You can not record in AUTO DJ mode.
y
On CD function, sound of MIC, SCRATCH or
DJ EFFECT is recorded only during AUDIO
CD X1 speed REC. It is recorded AUDIO CD
source too.
y
In case of the unsupported MP3/WMA le,
the le recording may be stopped.
y
It’ll be stored as follows.
AUDIO CD MP3/WMA
The other source* Tuner
* : AUX and the like.
Tuner : The current recording frequency is
shown.
,
Note

LG NS9550F Specifications

General

Brand	LG
Model	NS9550F
Category	Stereo System
Language	English