- 20 -
Copyright © LG Electronics Inc. All rights reserved.
Only training and service purposes.
2. ASSEMBLY
* This work should be worked by 2 persons.
(1) Input the Module.
(2) Remove the MODULE protective film.
[Self/Successive Check]
1. [Visual Check] Check the damage and dirt on the MODULE
[Key Control Point]
* Taking the outside when handling the LCD module
* Caution while handling the LCD module. (damage, removing the harness, hands print, dirt)
Do not remove module front protection film
1
2
GUIDE Line
OLED,MODULE-AM
GASKET
CUTTING POLYESTER SPONGE 35*15
LE480AQD-ENA2 47INCH 3840X2160
No
Description Qty
①
②
1
1
Specification