LG OLED48C36LA Owner's Manual

13
The descriptions in this manual are based on the buttons on the remote
control. Please read this manual carefully and use the TV correctly.
(Some buttons and services may not be provided depending on models or
regions.)
How to register the Magic Remote
Control
To use the Magic Remote, first pair it with your TV.
1 Put batteries into the Magic Remote and turn the TV on.
2 Point the Magic Remote at your TV and press the Wheel (OK) on the
remote control.
* If the TV fails to register the Magic Remote, try again after turning the TV
off and back on.
How to deregister the Magic Remote
Control
Press the (Back) and (Home) buttons at the same time, for five
seconds, to unpair the Magic Remote with your TV.
* Press and hold the (Home) and (Q. Settings) buttons for more
than 5 seconds to disconnect and re-register the Magic Remote at the
same time.
• It is recommended that an Access Point (AP) be located more than
0.2m away from the TV. If the AP is installed closer than 0.2m, the
Magic remote control may not perform as expected due to frequency
interference.
Using Always Ready
(Depending upon model)
You can operate the TV and connect to Bluetooth with direct voice recognition
while the power is off.
* → [ ] → [General] → [Always Ready], setting [Enable the
function] to on.
* Pressing the button while watching TV switches the screen to [Always
Ready] that is turned on, and pressing the button once more turns the
screen to [Always Ready] that is turned off.
* Press the (Home) button or the (Back) button to watch TV when
the screen is in [Always Ready] that is turned on.
* Press the Wheel (OK) button to display the wallpaper when the
screen is in [Always Ready] that is turned off, and press the button to
watch TV.
Note
• Using Always Ready may increase energy consumption.
• For more information about the feature, refer to the → [ ] →
[Support] → [User Guide] → [Troubleshooting] → [Learn More About
Always Ready].
Connecting Smart Devices using NFC
Tagging
NFC is technology that uses Near Field Communication (13.56MHz), allowing
you to conveniently send and receive information without separate settings.
By bringing a smart device near the NFC-enabled remote control, you can
install the LG ThinQ app and connect the device to the TV.
1 Turn on NFC in the smart device’s settings. To use NFC with Android
devices, set the NFC option to enable ‘read/write tags’ in the smart
device's settings. The NFC settings may vary depending on the device.
2 Bring the smart device near the (NFC) on the remote control. The
required distance for NFC tagging is about 1cm.
3 Follow the instructions to install the LG ThinQ app on your smart device.
4 Retagging the smart device to the remote control allows you to
conveniently access various features on the connected TV through the LG
ThinQ app.
Note
• This feature is available for NFC-enabled smart devices only.
• This feature is only available if the remote control has an NFC logo.
Specifications
Specifications (MR23GN, MR23GA)
Frequency range Output Power (Max.)
Bluetooth 2,400 to 2,483.5MHz 8dBm
NFC
*
13.553 to 13.567MHz -11.22dBuA/m @ 10m
* Only MR23GN

LG OLED48C36LA Specifications

General

Stand	Yes
App store	LG Content Store
Picture mode	Vivid, Standard, Eco, Cinema, Sports, Game, Filmmaker, (ISF)Expert(Bright Room), (ISF)Expert(Dark Room)
Country of origin	South Korea
Digital audio out	1
Wall mounting kit	No
USB ports quantity	3
DisplayPorts quantity	0
Headphone connectivity	3.5mm / Bluetooth
Annual energy consumption	91.323 kWh
Tuner type	Analog & digital
Firmware upgradeable via	Auto upgrade wizard, Network, USB
Wi-Fi standards	Wi-Fi 5 (802.11ac)
Bluetooth version	5.0
Dimming type	Pixel Dimming
Game features	Auto Low Latency Mode (ALLM), Game Dashboard, Game Optimizer, HGiG, Variable Refresh Rate (VRR)
Processor cores	4
Audio formats supported	AAC, AC3, AC4, EAC3, HE-AAC, MP2, MP3, PCM, WMA, apt-X
Picture processing technology	LG AI Picture Pro
High Dynamic Range (HDR) technology	Dolby Vision, High Dynamic Range 10 (HDR10), Hybrid Log-Gamma (HLG)
Energy efficiency scale	A to G
Power consumption (sleep)	0.5 W
Power consumption (typical)	65.7 W
Package type	Box
Package depth	162 mm
Package width	1373 mm
Package height	735 mm
Package weight	20500 g
Processor	α9 AI Processor 4K Gen6
Sound technology	AI Sound Pro (Virtual 9.1.2 Up-mix)
Sound modes	AI Sound Pro, Clear Voice Pro
Audio decoders	Dolby Atmos
RMS rated power	40 W
Number of speakers	-
Audio output channels	2.2 channels
Cables included	AC
Remote control type	Magic Remote
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Consumer Electronics Control (CEC)	SimpLink
Screen shape	Flat
Response time	- ms
Display diagonal	48 \
Display brightness	- cd/m²
Display technology	OLED evo
Native aspect ratio	16:9
Native refresh rate	100 Hz
Display diagonal (metric)	120.7 cm
Motion interpolation technology	OLED Motion
Stand type	Center stand
Product color	Black
Music apps	Amazon Music, Apple Music, BBC Sounds, Deezer, Spotify, TIDAL
Video apps	All 4, Amazon Prime Video, Apple TV, BBC iPlayer, BritBox, Chili, DAZN, Disney+, Freeview Play, ITV Hub, My5, NOW TV, Netflix, Rakuten TV, Twitch, YouTube
Smart modes	Cinema, Energy saving, Filmmaker, Standard, Vivid
Sports apps	DAZN, Sports Alerts
Operating system version	23
Operating system installed	Web OS

Weight and Dimensions

Stand width	470 mm
Depth (with stand)	230 mm
Height (with stand)	675 mm
Weight (with stand)	16800 g
Depth (without stand)	46.9 mm
Width (without stand)	1071 mm
Height (without stand)	618 mm
Weight (without stand)	14900 g