8
Specifications
Product specifications may be changed without prior notice due to upgrade of product functions.
• The energy information provided on the product is shown in accordance with the applicable regulations of each respective country, (Depending upon the
country).
- The Energy consumption was measured in accordance with IEC 62087.
• The actual energy consumption depends on the usage environment, (Example: content watched, TV settings, etc.).
• For information of the power supply and power consumption, refer to the label attached to the product, (Depending upon the country).
- The typical power consumption is measured in accordance with IEC 62087 or each country’s energy regulations.
* On some models, the label is inside the external device connection terminal cover.
* Depending upon the model or country, the typical power consumption may not be on label.
Power requirement AC 100-240 V~ 50/60 Hz
(Depending upon country)
Broadcasting Specifications
Digital Analog Digital Analog Digital Analog
Television system SBTVD (ISDBT)
NTSC / PAL-M /
PAL-N
DVB-T / T2
NTSC / PAL-M /
PAL-N
ATSC / 64 &
256 QAM
NTSC-M
Program coverage
VHF 2-13
UHF 14-69
DTV 2-69
CATV 1-135
VHF 2-13
UHF 14-69
DTV 2-69
CATV 1-125
VHF 2-13
UHF 14-69
DTV 2-69
CATV 1-135
CADTV 1-135
External antenna
impedance
75Ω
Environment Condition
Operating Temperature 0°C to 40°C Storage Temperature -20°C to 60°C
Operating Humidity Less than 80% Storage Humidity Less than 85%
Conditions for Wall Mount Installation
Tilt Angle 0° to 15°
* This specification range applies to TV wall mounts when adjusting for proper viewing angle.
To Next Page
Loading...
Need help?
General
