4
Installing the Battery and microSD Card
NOTE
It is important to fully charge the battery before initial use of the phone.
The phone comes with a rechargeable battery. Keep the battery
charged while not in use in order to maximize talk, use, and standby
time. The battery charge level is shown at the top of the screen.
Inserting a microSD card
1. Gently uncover the microSD slot located on the left side of the
phone.
2. Position the microSD card with the label facing up and slide it into
place until it is fully inserted and locked in place.
NOTE
●
The microSD card can be easily damaged by improper operation. Please be
careful when inserting, removing or handling it.
●
To safely remove the microSD card from your phone, unmount it from your
phone first.
The Basics
1. Hold the phone
with both hands
and use the
fingertip cutout at
the top of the
phone to pull open
the battery cover
(as shown above).
2. Align the battery
contacts with the
terminals near the
top of the phone,
then press the
battery into place.
3. Replace the battery
cover over the back
of the phone (as
demonstrated).
Apply a steady
downward pressure
until it clicks into
place.
To Next Page
Loading...
