LG PB56 Series User Manual

26
ENG
ENGLISH
SETTINGS / TO SEE WEB MANUAL / EXTERNAL CONTROL DEVICE SETUP
Supported Photo Formats
y
Category : 2D (jpeg, jpg, jpe)
[Available le type] SOF0: Baseline,
SOF1: Extend Sequential,
SOF2: Progressive
[Photo size] Minimum: 64 x 64,
Maximum: Normal Type: 15360 (W) x 8640
(H), Progressive Type: 1920 (W) x 1440 (H)
y
Category : BMP
[Photo size] Minimum : 64 x 64, Maximum :
9600 x 6400
y
Category : PNG
[Available le type] Interlace, Non-Interlace
[Photo size] Minimum : 64 x 64, Maximum :
Interlace : 1200 x 800, Non-Interlace : 9600
x 6400
y
BMP and PNG format les may be slower to
display than JPEG.
TO SEE WEB MANUAL
To obtain detailed User Guide information,
please visit www.lg.com.
EXTERNAL CONTROL
DEVICE SETUP
To obtain the external control device setup infor-
mation, please visit www.lg.com.
Problem Solution
Cannot control the TV with the
remote control.
y
Check the remote control sensor on the product and try
again.
y
Check if there is any obstacle between the product and
the remote control.
y
Check if the batteries are still working and properly
installed ( to , to ).
No image display and no sound
is produced.
y
Check if the product is turned on.
y
Check if the power cord is connected to a wall outlet.
y
Check if there is a problem in the wall outlet by connecting
other products.
The TV turns off suddenly.
y
Check the power control settings. The power supply may
be interrupted.
y
Check if the Sleep Timer or Off Time feature is activated
in the TIME settings.
y
If there is no signal while the TV is on, the TV will turn off
automatically after 15 minutes of inactivity.
When connecting to the PC
(HDMI), ‘No signal’ or ‘Invalid
Format’ is displayed.
y
Turn the TV off/on using the remote control.
y
Reconnect the HDMI cable.
y
Restart the PC with the TV on.

LG PB56 Series Specifications

General

Brand	LG
Model	PB56 Series
Category	Plasma TV
Language	English