PREPARATION
6. Connect the power.
• For global models
- On the back of AC Smart BACnet, con-
nect the power adapter to the power
port.
The adaptor is not provided with the AC
Smart BACnet package sold in the U.S.
Notes
You can hang the power cord on
the power cord hanger located
below the power port.
• For US models
- At the bottom of AC Smart BACnet,
connect the power cord to the power
port.
Notes
In some countries, except for the
U.S, you can connect the DC 12
V power to the AC Smart BACnet
by using the provided adapter.
If necessary, connect the 24 V~
power to the AC Smart BACnet.
7. After attaching the hook on the top of the
main body to the top of the rear panel
installed on the wall, please push the
top of the main body unit forward for firm
attachment.
Caution
Please screws 2 points from the
bottom of the unit to prevent from
falling.
Notes
Product removal
After removing 2 screws from the
bottom of the body, slightly pull the
body using the flatblade screwdriver
and lift up the body to remove the
product.
8. Connect the power cord of the power
adapter to the power plug.
To Next Page
Loading...
