To Next PageTo Next Page
Need help?Do you have a question about the LG PREMTB100 and is the answer not in the manual?
General| Brand | LG |
|---|---|
| Model | PREMTB100 |
| Category | Air Conditioner |
| Language | English |
Warnings for electrical work, repair, standards, and environment.
Void warranty if not professional; avoid explosive atmospheres.
Avoid flammable objects, keep dry, avoid dropping, use sharp objects carefully.
Use soft cloths for cleaning; avoid pressing screen with force.
How to turn the air conditioner and ventilator on and off.
Guide to selecting various operation modes like Cool, Dry, Heat, etc.
Details on cooling operation, temperature settings, and delay function.
Details on heating operation, temperature settings, and limitations.
Managing room temperature with extended heating and cooling ranges.
Quickly lowering indoor temperature with enhanced cooling.
Quickly increasing indoor temperature with enhanced heating.
How to set the desired temperature for cooling, heating, and AI/auto modes.
Controls desired temperature for comfort and power saving.
Locks buttons to prevent unauthorized use or limit temperature ranges.
How to access and set timer functions.
Steps to access the schedule category and menu.
Check, add, or edit saved timer (schedule) information.
Step-by-step guide to adding new schedules.
Steps to access the energy settings menu.
Checks the product's instantaneous power consumption.
Checks operation time and power consumption data.
Returns to desired temp after set time for energy saving.
Stops product operation after set time for energy saving.
Sets the outdoor unit capacity for energy management.
Sets the target value for instantaneous power consumption.
Sets the target power consumption per hour.
Sets the target value for instantaneous power's operation time.
Steps to access the function setting menu.
Controls the wind blowing angle of the indoor unit.
Manages filter cleaning messages and removes them.
Sets automatic temperature conversion between cooling and heating.
Changes the outdoor unit's defrost mode operation.
Changes the outdoor unit's Smart Load Control stage value.
Enables energy saving via human detection and wind direction.
Steps to access the user setting menu.
Sets the language displayed on the remote controller.
Sets GUI type, supports dual setpoint for cooling/heating.
Steps and precautions for installing the remote controller.
Connects and controls multiple indoor units with one remote controller.
Steps to enter the installer setting mode with password.
Configuration options for air conditioner installation.
Configuration options for ventilator installation.
Performs test run after product installation.
Sets central control address for indoor unit communication.
Sets fan speed value corresponding to fan speed for installation.
Selects temperature sensor to decide indoor temperature.
Configures master/slave settings through the remote controller.
Sets the outdoor unit's function as Master / Slave.
Automatically sets fan rotation speed for rated airflow.
