To Next PageTo Next Page
Need help?Do you have a question about the LG PREMTA200 and is the answer not in the manual?
General| Brand | LG |
|---|---|
| Model | PREMTA200 |
| Category | Air Conditioner |
| Language | English |
Key safety warnings and precautions to prevent injury and property damage.
Advice on contacting an installation specialist for proper setup.
Important usage guidelines, including airflow hazards, ventilation, and special purpose restrictions.
Information on contacting authorized service dealers for repair and maintenance.
Encourages reading the manual for preventive care and maintenance tips.
Section for recording model, serial number, dealer, and purchase date.
Lists the components included for the wired remote controller installation.
Step-by-step procedure for mounting and wiring the wired remote controller.
Guides through the initial setup process for synchronizing and configuring the unit.
Explains the different screens displayed on the wired remote controller for monitoring.
Details various operation modes like Cool, Heat, Auto, Dry, Fan, Bypass, and Heat Exchange.
Instructions on how to select and adjust the desired temperature using the controller.
How to select and adjust the fan speed from the available options.
Introduces the availability of additional functions beyond basic operation.
Navigating the menu to access schedule, energy, settings, and installer settings.
Information on checking and managing scheduled operations for the appliance.
How to lock functions on the controller to prevent unauthorized use.
Checking air quality and fine dust status via the air purifying icon.
Details on checking real-time monitoring data like humidity, CO2, and temperature.
Enhances heating capability by turning on the electric heater during heating operation.
Improves user comfort and saves energy by controlling temperature during cooling.
Sets indoor fan operation when the indoor unit thermal is off.
Maintains comfort by continuing cooling operation and adjusting intensity.
Configures the operation of an optional ventilation kit for the indoor unit.
Saves energy using cold outdoor air during cooling with ventilation products.
Makes the indoor air clean and pleasant.
Automatically cleans the filter after a certain period of use.
Operates the humidifier when the room is dry.
Sets the operation or stop for the mosquito away function.
Controls up to 8 zones for duct products, allowing individual zone management.
Sets advanced operation modes for ventilation products.
Allows selection of desired wind direction and smart/refresh modes.
Guides on how to add or edit schedule modes, time zones, and repeat days.
Instructions on selecting and deleting schedule events from the timeline.
Advanced settings for schedules, including vacation/event mode and season selection.
Setting departure and return dates/times for temporary operation changes.
Selecting products and setting detailed operation information for scheduled modes.
How to check the status of standard and vacation schedules on the Home screen.
Temporarily suspending a running schedule for other operations.
Displays outdoor unit operation, indoor temp, and desired temp trends over time.
Compares energy usage time and power usage on weekly, monthly, or annual basis.
Configuring general settings like language, unit type, screen saver, date/time, and lock.
Settings specific to air conditioner and ventilator functions like vane control and filter status.
Accessing service contact, model info, SW version, control history, and setup.
Accessing configurable items after entering the password for installation setup.
Specific installer settings for air conditioners like test run, addresses, and fan speed.
Setting static pressure for duct products in multiple steps.
Setting standby time to protect the outdoor unit during cycle transitions.
Setting indoor fan operation when thermal is off in cooling mode.
Prioritizing heater use over outdoor unit cycle for efficiency in heating mode.
Setting air conditioner fan operation status during ventilation interlock.
Setting recovery state for the product after a power outage.
Setting retention time for occupancy sensor recognition.
Setting the usage for the CN_CC port of the indoor unit.
Determining the use of the CN_EXT port of the indoor unit.
Setting the outdoor unit's function to Master or Slave.
Operating the indoor unit fan longer for cooling/heating efficiency.
Setting the object to prioritize low noise mode.
Selecting the LED color to display fine dust status.
Changing the color display method for fine dust status by national standards.
Setting up detailed usage for the human body detection kit.
Setting the position of humidity detection.
Setting standby mode/priority cooling usage and thermal off time.
Setting outdoor unit cycle and heater operation based on temperature.
Setting to display energy data which the outdoor unit estimated.
Selecting the use of the CN-Port of the indoor unit.
Displaying temperature offset detected by the remote controller.
Applying humidity offset detected by the remote controller.
Displays the accumulated operating time of the indoor Fan motor.
Setting the master/slave for the temperature sensor by indoor unit.
Displays the cumulative time of power applied to the indoor unit.
Setting the physical address of the indoor unit.
Setting whether to use the floor thermopile sensor.
Setting the air supply fan speed value.
Setting the exhaust fan speed value.
Setting the unit's installation direction.
Setting the priority of airflow during express ventilation operation.
Setting humidification function for ventilation when operating alone.
Setting heat humidification function of DX ventilation to automatic or manual.
Changing the standard fan speed of ventilation.
Setting the filter replacement cycle for ventilation products.
Instructions on connecting the wired remote controller to the ThinQ App for settings control.
Details on using the app for schedules, settings, and differentiating connections.
Information on obtaining open source code and license terms from LG.
Compliance information regarding FCC rules, interference, and operation conditions.
RF exposure limits and operating instructions for compliance.
Compliance information for Industry Canada license-exempt transmitters.
IC radiation exposure limits and operating instructions for compliance.
Technical specifications for the residential remote controller, including model and frequency.
