Tap the icon to go to the Error History screen.
Check the schedule information that is currently
Please refer to the Schedule’s Detailed Description
When locking a function by remote controller or
central controller, a lock icon is displayed.
When you enter Settings – General Settings – Lock
menu, you can set/check the lock status.
You can check the fine dust status by selecting the
air purifying icon on the home screen.
The air purifying icon is only displayed when air
purifying is on and operating.
The total index shows the worst of the 3 dust state
values as representative values.
You can go to the air purifying display screen by
flipping the screen on the home screen.
The monitoring information can be checked by
swiping left or right from the home screen.
At the top of the screen, humidity Co2
concentration and outdoor temperature are
The product operation status is displayed in the
An alarm is displayed at the bottom of the screen
when there is a problem with the product.
To Next Page
Loading...
