85
FUNCTION SETTING
ENGLISH
84
FUNCTION SETTING
Human detection mode setting
It is the function that enables energy saving through the human detection power saving operation
and wind direction setting.
In the function setting list, select human detection operation mode category and press [OK] but-
ton to move to the lower level setting list.
After selecting human detection power saving mode category, if you press [OK] button, it moves
to the detail screen.
You can select OFF ← → On/Off Power saving ← → Temperature power saving for mode value.
You can set the time value when you select On/Off power saving or Temperature power saving.
OK
After selecting human detection wind direction category, you can set the following setting values
using [<,> (left/right)] button.
Discharge direction
This is a function to set the usage of the upper and lower vanes when operating the product.
You can set the following setting values using [<,>(left/right)] button.
NOTE
!
Human detection operation setting function may not work in some products.
Value Description
OFF Do not use human detection wind direction control
Direct Human detection direct wind operation
Indirect Human detection indirect wind operation
Discharge
direction
Concurrency (whole)
Top
Bottom
NOTE
!
Discharge direction setting function may not be available on some products.
To Next Page
Loading...
