129
INSTALLER SETTING
128
INSTALLER SETTING
ENGLISH
Fixed air volume (air conditioner / DX ventilator)
It is the function to apply different fan speeds automatically for each thermal control status.
• You can set the following setting values using [<,>(left/right)] button.
Value Comp on Comp off
Variable Set fan speed Low
Fixed Set fan speed Set fan speed
Zone Type Setting(air conditioner)
This function is only available on some products.
This function select a type of zone control type which indoor unit support as 'new type' or 'old
type'.
Zone Number Setting(air conditioner)
This function is only available on some products.
Zone Number is to set the number of installed zones. It's possible to control only in zone new
type.
Value
Old
New(4 Zone)
New(8 Zone)
Value
New(4 zone) : 2~4
New(8 zone) : 2~8
To Next Page
Loading...
