153
INSTALLER SETTING
ENGLISH
152
INSTALLER SETTING
Estimated energy display (air conditioner)
This function can set to display energy data which outdoor unit estimated power consumption
data without wattmeter.
CN_PTC setting (air conditioner)
This is a function to set PTC Port of indoor unit.
Password initialization (air conditioner / general, DX ventilator)
It is the function to initialize (0000) when you forgot the password set in the remote controller.
• In the installer setting list, select the password initialization setting category, and press [OK]
button to move to the detail screen.
• When you press “initialization” button, a popup screen appears, and when you press “check”
button, password initialization starts, and the user password is changed to 0000.
OK
Setting value Description
Use Display energy consumption data which outdoor unit estimated
Not Use Not display energy consumption data which outdoor unit estimated
Setting value Description
Normal Auxiliary heating interlock deactivated
Special Auxiliary heating interlock activated
To Next Page
Loading...
