103
SERVICE SETTING
ENGLISH
102
USER SETTING
Indoor unit display light brightness setting
This function adjusts the brightness of the indoor unit display light.
• You can set the following setting values using [<,>(left/right)] button.
※ "Auto" setting is only available in the indoor units that is equipped with the human detection
sensor.
※ When set to Auto, the indoor unit display light brightness will automatically adjust according to
the illuminance detected by the human detection sensor.
※ "Off" setting is only available in the indoor units that have brightness control function.
Value
On Off Auto
SERVICE SETTING
How to enter service setting
To enter the menu displayed at the bottom, you need to enter the service setting menu as fol-
lows.
• In the menu screen, press [<,>(left/right)] button to select the setting category, and press [OK]
button to move to the setting list.
• In the setting list, select the service setting category, and press [OK] button to move to the
service setting list.
Service setting
• You can set the product service functions.
• Some functions may not be displayed/operated in some product types.
OK
Menu Description
Service contact
Check and input the service center phone number that you can call
when there is service issue.
Model Information
Check the indoor/outdoor product group and capacity information to
which the remote controller is connected.
RMC Version Information Check the remote controller model name and software version.
Error History View the connected indoor unit’s error history.
Open Source License View the remote controller’s open source license.
To Next Page
Loading...
