149
INSTALLER SETTING
148
INSTALLER SETTING
ENGLISH
Humidity sensing position (air conditioner)
It is the function to set the location to detect humidity.
You can use [<, > (left/right)] button to set the following setting values.
Value Description
Remote controller (default value) Humidity sensor of the remote controller itself
Indoor unit Humidity received from indoor unit
ODU cycle priority (air conditioner)
This function can set cycle priority of outdoor unit.
Multi V Heat Pump system does not support mixed mode therefore wired remote controller can
not show opposite operation mode for select option while ODU operate cooling or heating cycle.
Set this function user can select opposite operation mode with wired remote controller and in-
door units enter to ‘standby’ status or outdoor unit can support cooling first and operate heating
with heater.
OK
To Next Page
Loading...
