LG PF510Q User Manual

60
ENGLISH
[Digital Sound Output]
(Q. Settings) → → [Sound] → [Advanced Settings] → [Digital Sound Output]
You can congure the [Digital Sound Output] settings.
• You can set when (Q. Settings) → → [Sound] → [Sound Out] → [Use
Wired Speaker] is set to [HDMI(ARC) Device].
• When [Pass Through] is enabled, sound effects may not be output.
• The codec output with a device may differ from input signals.
Sound Input Digital Sound Output
[PCM] All PCM
[Auto]
/ [Pass
Through]
MPEG PCM
Dolby Digital Dolby Digital
Dolby Digital Plus /
Atmos
(HDMI ARC) Dolby Digital Plus / Atmos
Dolby TrueHD (HDMI
only)
(HDMI ARC) Dolby Digital Plus / Atmos
HE-AAC / AAC
(HDMI ARC) Dolby Digital / Dolby Digital
Plus
• Dolby TrueHD, HDMI eARC, Dolby Atmos: Some models may not be supported.
• When connected with HDMI eARC, the output audio type will depend on the
audio type supported by the connected device.
• Depending on the connected device and the type of input audio, it may output as
Dolby MAT PCM (Dolby Metadata-Enhanced Audio Transmission PCM).
• When [Digital Sound Output] is set to [Pass Through] and the HDMI input is
Dolby TrueHD, Multi-Channel PCM, audio can be output as bypass.

LG PF510Q Specifications

General

Resolution	1920 x 1080 (Full HD)
Brightness	450 ANSI Lumens
Contrast Ratio	100, 000:1
Light Source	LED
Throw Ratio	1.2:1
Display Technology	DLP
HDR	HDR10
Operating System	webOS
Power Consumption	65W
Lamp Life	Up to 30, 000 hours
Connectivity	Wi-Fi, Bluetooth
Keystone Correction	Vertical ±40 degrees
Inputs/Outputs	HDMI, USB
Audio Output	5W speaker