LG PF510Q User Manual

10
ENGLISH
HOW TO OPERATE THE PROJECTOR
Using [Installation Wizard]
[PJT Mode]
(Q. Settings) → ([Installation Wizard]) → [PJT Mode]
This function turns the projected image upside down or ips horizontal.
[High Altitude]
(Q. Settings) → ([Installation Wizard]) → [High Altitude]
If the projector is used at an altitude higher than 1200 meters (3937.0 feet), turn this
on.
Otherwise, the projector may overheat or its protection function may be activated. If
this happens, turn the projector off and then on again after waiting for several minutes.
• Some models may not be supported.
[Remote Control Power]
(Q. Settings) → ([Installation Wizard]) → [Remote Control Power]
The power button on the LG TV remote control can be used separately or together with
the projector.
• [Projector + TV]
The power on the projector and TV can be used together.
You can turn the projector on and off with the LG TV remote control.
• [Projector Only]
The power on the projector and TV can be used separately.
You cannot turn the projector on and off with the LG TV remote control.
• Some projector models may not support this feature.
• Other company's products are not compatible.

LG PF510Q Specifications

General

Resolution	1920 x 1080 (Full HD)
Brightness	450 ANSI Lumens
Contrast Ratio	100, 000:1
Light Source	LED
Throw Ratio	1.2:1
Display Technology	DLP
HDR	HDR10
Operating System	webOS
Power Consumption	65W
Lamp Life	Up to 30, 000 hours
Connectivity	Wi-Fi, Bluetooth
Keystone Correction	Vertical ±40 degrees
Inputs/Outputs	HDMI, USB
Audio Output	5W speaker