LG PF510Q User Manual

63
ENGLISH
[Usage Limits Setting]
(Q. Settings) → → [General] → [Family Settings] → [Usage Limits Setting]
You can use the projector in the set time period only. Outside of the set time period,
you must enter your password to use the projector.
1 Set [Enable the function] to [On].
2 Set [Start Time] and [End Time].
Selecting [Repeat] will activate this feature every day.
3 Select [Set]
[Volume Limit Mode]
(Q. Settings) → → [General] → [Family Settings] → [Volume Limit Mode]
Set [Enable the function] to [On]. The volume cannot be raised above a certain level for
the protection of your hearing.
• [Volume Limit Mode] may not work for audio devices connected to the HDMI
(ARC)/headphone port.
[Screen Time Reports]
(Q. Settings) → → [General] → [Family Settings] → [Screen Time Reports]
You can check your projector usage time.

LG PF510Q Specifications

General

Resolution	1920 x 1080 (Full HD)
Brightness	450 ANSI Lumens
Contrast Ratio	100, 000:1
Light Source	LED
Throw Ratio	1.2:1
Display Technology	DLP
HDR	HDR10
Operating System	webOS
Power Consumption	65W
Lamp Life	Up to 30, 000 hours
Connectivity	Wi-Fi, Bluetooth
Keystone Correction	Vertical ±40 degrees
Inputs/Outputs	HDMI, USB
Audio Output	5W speaker