69
ENGLISH
Setting a Wireless Network
(Q. Settings) → → [General] → [Network] → [Wi-Fi Connection]
If you congure settings for the network, you can use various services such as online
contents and applications.
If you have set up the projector for a wireless network, you can check and connect to
the available wireless Internet networks.
1 Press the (Q. Settings) button on the remote control.
2 Select → [General] → [Network] → [Wi-Fi Connection].
3 Set to [On].
4 Select the wireless router to connect.
For more detailed settings, select [Other Network].
• [Add a Hidden Wireless Network]
If you input the name of network directly, you can add a wireless network.
• [Connect via WPS PBC]
If the wireless router you want to connect to has a Wi-Fi Protected Setup-Push
Button Configuration (WPS-PBC, a button to set up a secure Wi-Fi connection)
feature, you can easily connect to the wireless router by pressing the WPS-PBC
button on the router. Press the wireless router’s WPS-PBC button and then
press the projector’s [Connect] button.
• [Connect via WPS PIN]
This is a method to connect to an access point using a Wi-Fi Protected Setup-
Personal Identification Number (WPS-PIN). Select the access point (AP) to
which you would like to connect. Enter the PIN displayed on the access point’s
Wi-Fi device.
• [Advanced Wi-Fi Settings]
Once you connect to a wireless network you can view connection information
such as detailed IP address information. In addition, you can change the IP
address and DNS server address you want to connect to by pressing the [Edit]
button.
– The IPv6 setup does not support [Edit].
To Next Page
Loading...
Need help?
General
