LG PF510Q User Manual

78
ENGLISH
[Support]
[Software Update]
(Q. Settings) → → [Support] → [Software Update]
If the software needs to be updated, run Software Update to apply the latest software
version for use.
• [Auto Update]
If set to [On], updates will be proceeded automatically without asking when
there is a new update after a version check.
• [Check for Updates]
When checking for the latest update version, you can perform updates only if an
update file of a later version is available. The projector automatically checks your
software version but, if necessary, you can perform a manual check.
• The configurable items differ depending upon model.
• The latest version can be obtained via internet connections.
• If software is not updated, certain functions may not work properly.
• In some countries, [Auto Update] is not displayed if you are not connected to the
internet.

LG PF510Q Specifications

General

Resolution	1920 x 1080 (Full HD)
Brightness	450 ANSI Lumens
Contrast Ratio	100, 000:1
Light Source	LED
Throw Ratio	1.2:1
Display Technology	DLP
HDR	HDR10
Operating System	webOS
Power Consumption	65W
Lamp Life	Up to 30, 000 hours
Connectivity	Wi-Fi, Bluetooth
Keystone Correction	Vertical ±40 degrees
Inputs/Outputs	HDMI, USB
Audio Output	5W speaker