13
ENGLISH
Using SIMPLINK
With a single remote control, you can easily manage various devices such as a soundbar
or set-top box connected to a projector with HDMI.
• Up to three devices can be connected and used simultaneously.
1 Connect the SIMPLINK HDMI Output port to the projector’s HDMI IN port with
an HDMI
®
cable.
2 Select (Q. Settings) → → [General] → [Devices] → [HDMI Settings].
3 Set [SIMPLINK (HDMI-CEC)] to [On].
4 Turn on the connected device. When the projector automatically connects to
the device, the input will switch. If the device is not automatically connected to
the projector, click the button.
• This feature works only with devices with the logo. Check for the
SIMPLINK logo on the external device. There may be a problem using the device
if the device does not meet the required specifications.
• A high-speed HDMI
®
cable with CEC (Consumer Electronics Control) function is
required to use SIMPLINK. Pin 13 of the high-speed HDMI
®
cable is used for data
transfer between devices.
• If you want to output sound to the external audio equipment connected through
the HDMI
®
cable, set [SIMPLINK (HDMI-CEC)] to [On].
To Next Page
Loading...
Need help?
General
