LG PK3 - Multi Phone Pairing

Operating 19
Operating
2
Multi phone pairing
The unit can be connected to 2 Bluetooth devices at
the same time.
Pairing with Two Devices
1. Connect the unit to a Bluetooth device.
2. When the Bluetooth device and unit are
connected, press and hold
j
button for 2 seconds.
Then Bluetooth LED blinks with the sound. The
unit is changed to multi phone pairing mode.
3. Select "LG-PK3 (XX)" from device list on another
Bluetooth device. Then the speaker is connection
with 2 Bluetooth devices.
4. When connection of 2 Bluetooth devices are
successful, Bluetooth LED will turn on.
y
When you use Dual Play mode, the multi
phone pairing connection is not supported.
Press and hold the
3
button for 2 seconds
to cancel Dual play mode.
y
You can connect this unit with up to 2
Bluetooth devices simultaneously same
method as above description.
y
When speaker is ready to multi phone pairing
mode, you need to connect other Bluetooth
devices and speaker within a few minutes
(Approx. 1 minute). Otherwise multi phone
pairing mode will be canceled.
y
In case of multi-pairing, only one activated
Bluetooth device can use voice command.
y
When multi phone pairing connection is
completed, some of mobile phones (ex. AptX
HD supported devices) play music after a
brief pause.
,
Note
y
The multi phone pairing connection is only
supported on Android devices. (Multi phone
pairing connection may not be supported
depending on the connected device
specications.)
y
Removable/detachable Bluetooth device (Ex
:Dongle etc..) doesn't support multi phone
pairing.
y
Even if this unit connected up to 2 Bluetooth
devices, you can play and control music by
using only one of the connected devices.
y
After multi-pairing connection, it takes a little
time for the music to be played depending on
the Bluetooth devices.
y
In case of multi phone pairing, 2 Bluetooth
device are not supported automatically
connection. Only one Bluetooth device will be
automatically connected speaker. The other
device should be connected manually.
y
If you get out of Bluetooth effective distance
without disconnecting Bluetooth, it takes
a few minutes to connect other Bluetooth
devices. But after power off and on, you can
connect other Bluetooth devices without
waiting.
y
If you try to pair a new Bluetooth device
when it is connected 2 Bluetooth devices,
this speaker automatically disconnect to all
Bluetooth devices.
,
Note