Operating 21
Operating
2
y
When you enjoy Dual Play, Multi phone pairing is
not supported.
- Main speaker (
) connects only one
Bluetooth device.
y
In Dual Play mode, you can connect only the
main speaker(
) with the Bluetooth device.
y
If you turn the power off and then on again, two
speakers need to be reconnection for using dual
play mode.
y
If the units fail to connect Dual play, go to step 1
and try again.
y
When Dual Play connection is on processing,
you cannot search the units on other Bluetooth
devices.
y
When you disconnect Dual Play connection,
press and hold the
3
buttons for 2 seconds of
one of the two speakers again.
y
When you enjoy Dual Play, you can adjust the
Volume, Playback or Equalizer of both main (
)
and other (
) speakers at the same time.
y
When you connect Dual play connection while
using portable mode, this speaker automatically
change to Bluetooth mode.
y
In Dual Play mode, you can receive a call on only
main speaker due to audio howling.
y
If you connect Portable cable in Dual Play mode,
it will cancel Dual play mode and then change
Portable mode.
y
To change the Bluetooth device in Dual Play
mode, press and hold
j
for 2 seconds to
disconnect current Bluetooth device and
connect the desired Bluetooth device.
y
When you connect Bluetooth device (iOS
device etc.) to this unit or operate the device,
the volume level can be synchronized with each
other.
y
In Dual Play mode, make the distance between
the speakers as close as possible each other.
y
Depending on network environment, the Dual
Play may not work well.
y
When enters Dual play mode, some of mobile
phones (ex. AptX HD supported devices) play
music after a brief pause.
y
In Dual Play mode, you use voice command on
only main speaker.
,
Note