LG Pro Centric 55ET960H - Page 30

30
206-4350
EZ-Manager Wizard (Cont.)
(Continued from previous page)
Manual Pro:Centric Conguration
1. With the Searching for Pro:Centric Server screen on display, use the Left/Right arrow keys on
the Installer Remote to select MANUAL PRO:CENTRIC at the bottom of the screen, and then
press the Wheel (OK) button.
In the Pro:Centric Manual Conguration screen (see examples below), you will be able to
congure the appropriate Pro:Centric settings in the TV. Use the Up/Down arrow keys on the
Installer Remote to navigate between elds.
2. In the Pro:Centric Mode eld, use the Left/Right arrow keys to select the appropriate Pro:Centric
Application Mode—GEM (Java), HTML, or CONFIGURATION ONLY.
Note: For remote management only, select CONFIGURATION ONLY. The TV will search for TV
E-Z Installation data downloads; however, Pro:Centric application data will not be downloaded,
i.e., Installer Menu item 098 PRO:CENTRIC will be set to 0.
PRO:CENTRIC MANUAL CONFIGURATION
Pro:Centric Mode
Media Type
Data Channel
Signal Strength
Signal Quality
0%
0%
X
Data Channel Not Found
BACK
SEARCH
<
CONFIGURATION ONLY
>
<
RF
>
< 1 >
04
Pro:Centric Manual Configuration Screen
with RF Media Fields
Note: By default, the Pro:Centric Manual
Conguration screen initially shows RF
conguration elds.
PRO:CENTRIC MANUAL CONFIGURATION
Pro:Centric Mode
Media Type
Server Address
IP Type
IP Address
IP Port
X
IP Server Not Found
BACK
SEARCH
<
CONFIGURATION ONLY
>
<
IP
>
< IP Address >
< IPv4 >
04
Pro:Centric Manual Configuration Screen
with IP Media Fields
(Continued on next page)