LG Pro Centric 55ET960H - Page 98

98
206-4350
(Continued from previous page)
To change the TV Zone, select/highlight the TV Zone eld and press the Wheel (OK) button. Then,
use the Left/Right arrow keys to specify the desired TV Zone # (0–8). Press the Wheel (OK) button
when you are nished.
• Label: Allows you to select a North, South, East, or West text label for this TV. Select/highlight
the Label eld and press the Wheel (OK) button. Then, use the Up/Down arrow keys to select the
applicable label. Press the Wheel (OK) button when you are nished.
• Room Number: Allows you to specify the number of the room—up to 16 characters—in which the TV
is located. To enter a room number, use the Up/Down arrow keys to select/highlight the Room Number
eld and press the Wheel (OK) button. You can then use the number keys on the Installer Remote to
direct enter a room number, or you can use the arrow keys to select the appropriate alphanumeric
character(s) from the pop-up virtual keyboard at the bottom of the screen. When you are done, select
Enter from the virtual keyboard, and then press the Wheel (OK) button on the Installer Remote.
Note: The TV name (default: TV serial number + model name) will be changed to the room number
specied here. See “Media Share Setup” on pages 78 to 80 for further information on the TV name.
ROOM INFO
General /
Wi-Fi Zone
0
TV Zone
0
Label
-----
Room Number
^
^
^
Picture
Sound
Channels
General
Safety
Accessibility
GENERAL
Language
Location
Room Info
Time & Date
Timers
Set ID
1
SIMPLINK (HDMI-CEC)
USB Eject
User Agreements
^
^
^
Picture
Sound
Channels
General
Safety
Accessibility
^
5. When you have completed the elds as necessary, press BACK/EXIT to return to and/or exit the TV
menus, or press the button to return to program viewing.
Reference: Using the TV’s Zoning Features (Cont.)