LG RAD136 - Pausing Recording; To Select Recording Bit Rate and Speed

Operating18
Operating
3
Pausing recording
During recording, press R on the unit or
X
REC
on the remote control to pause recording. Press it
again to restart recording. (Only Radio/ AUX)
To select recording bit rate
and speed
1. Press R on the unit or
X
REC on the remote
control for longer than 3 seconds.
2. Use
C
/
V
on the unit or remote control to
select the bit rate.
3. Press R on the unit or
X
REC on the remote
control again to select the recording speed.
4. Press
C
/
V
on the unit or on the remote
control to select a desired recording speed;
(Only AUDIO CD)
X1 SPEED
- You can listen to music while recording it.
X2 SPEED
- You can just record the music  le.
5. Press R on the unit or
X
REC on the remote
control to  nish the setting.

You can check the recording percentage
rate for the USB record on the display
window during the recording. (MP3/ WMA
CD Only)

During recording MP3/ WMA, there is no
sound.

When you stop recording during playback,
the  le that has been recorded at that time
will be stored. (AUDIO CD Only)

Do not remove the USB device or turn
o the unit during USB recording. If not,
an incomplete  le may be made and not
deleted on PC.

If USB recording does not work, the
message like “NO USB”, “ERROR”, “FULL” or “NO
REC” is displayed on the display window.

Multi card reader device or External HDD
can not be used for USB recording.

A  le is recorded by about 512 Mbyte when
you record for a long term.

When you stop recording during playback,
the  le will not be stored.

You may not store more than 999  les.

It’ll be stored as follows.
AUDIO CD MP3/ WMA
The other
source*
,
Note
The making of unauthorized copies of copy-
protected material, including computer
programs,  les, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal o ense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights