What to do if my LG RH10V9AV2W won't turn on?
If your LG dryer won't turn on, check these potential causes: * Ensure the power cord is properly plugged into a grounded outlet matching the appliance's rating plate. * Check for a blown house fuse, a tripped circuit breaker, or a power outage. Reset the circuit breaker or replace the fuse. If there's a circuit overload, have it corrected by a qualified electrician.
Why is lint left on clothes after drying in my LG RH10V9AV2W?
Lint may be left on clothes after drying in your LG dryer due to several reasons: * The lint filter may not have been cleaned properly. Remove the lint from the lint filter after every cycle. * Clothes may not have been sorted properly. Some fabrics produce lint and should be dried separately from lint-trapping clothes. * The appliance may be overloaded. Divide extra-large loads into smaller ones for drying. * Tissue or paper may have been left in pockets. Check pockets thoroughly before drying clothes.
Why are my clothes wrinkled after drying in my LG Dryer?
Clothes may be wrinkled after drying in your LG dryer because they have dried for too long (overdried). Try a shorter drying time or the clothes have been left in the appliance for too long after the cycle ends. Use the Anti Crease option.
Why is there excess static in clothes after drying in my LG RH10V9AV2W Dryer?
Excess static in clothes after drying in your LG dryer can occur if clothes have dried for too long (overdried). Adjust settings and use a shorter drying time or use Sensor Dry programmes. It can also happen when drying synthetics, permanent press, or synthetic blends. Try using fabric softener, or use shorter Timed Drying time settings.
Why does my LG Dryer leak water?
If your LG dryer is leaking water, it could be due to: * Incorrectly connected water container hose or optional drain hose. Connect them correctly. * Clothes or foreign substances caught in the door. Check the door before using the appliance. If leaks continue, contact the LG Electronics Customer Information Centre.
Why do clothes shrink in my LG RH10V9AV2W?
Clothes may shrink in your LG dryer if garment care instructions are not being followed. To avoid shrinking your clothes, always consult and follow fabric care instructions.
Why does my LG Dryer run and pause by itself after the drying cycle finishes?
Your LG dryer runs and pauses by itself after the drying cycle finishes because the anti crease option has been set. This prevents creases by intermittently tumbling the clothes.
Why is the drying time not consistent on my LG RH10V9AV2W?
The drying time for a load in your LG dryer will vary depending on the type of heat used (electric), the size of the load, the type of fabrics, the wetness of the clothes, and the lint filter condition.
What to do if clothes have damp spots after a Sensor Dry programme in my LG RH10V9AV2W Dryer?
If clothes have damp spots after a Sensor Dry programme in your LG dryer, it may be due to a very large or very small load. Use a Timed Drying programme for very small loads.
How to fix dE1 DOOR ERROR on my LG RH10V9AV2W Dryer?
The dE1 DOOR ERROR on your LG dryer indicates that the door has been opened during operation or isn't closed properly. Ensure the door is completely closed. If the error persists, call for service.
General| Capacity | 9 kg |
|---|---|
| Energy Efficiency Class | A+++ |
| Dimensions (H x W x D) | 850 x 600 x 690 mm |
| Weight | 57 kg |
| Noise Level | 62 dB |
| Control Type | Electronic |
| Display Type | LED |
| Drying Technology | Heat Pump |
| Delay Start | Yes |
| Child Lock | Yes |
| Color | White |
| Type | Heat Pump |
| Drying Programs | Cotton, Delicate, Wool, Quick Dry |
| Programs | Cotton, Mix, Delicate, Wool, Allergy Care |
To Next Page
