LG RH80M2AV6R - User Manual

Questions and Answers

S
smithtonyAug 16, 2025
Why does my LG RH80M2AV6R Dryer take so long to dry?
- D
  Derrick HoffmanAug 16, 2025
  Several factors can cause your LG dryer to take longer than expected. The lint filter surface may be clogged, so wash it with lukewarm water. The heat exchanger might be clogged, so clean it. Ensure the ventilation grills are open to maintain room temperature. A limescale layer on the humidity sensor can also extend drying time, so clean the sensor. Avoid overloading the dryer and select a higher spin speed on your washing machine to ensure laundry is sufficiently spun before drying.
W
williamskathrynAug 18, 2025
What to do if LG RH80M2AV6R Dryer leaves clothes damp?
- A
  Angela GarciaAug 19, 2025
  If your laundry is coming out damp from your LG dryer, the selected program might not be suitable for the type of laundry. Check the care labels on your items and select an appropriate program, using time programs if needed. Also, a clogged lint filter or heat exchanger can cause this issue, so wash the filter and clean the heat exchanger. Avoid overloading the dryer and ensure your laundry is properly spun in the washing machine beforehand.
S
solomonericAug 22, 2025
How to fix LG RH80M2AV6R that won't start?
- K
  Karen RiosAug 22, 2025
  If your LG dryer won't start, first ensure it's properly plugged into the socket and that the loading door is completely closed. Verify that you've set a program and haven't left it in Standby (Pause) mode. Also, check if the Child lock is active and deactivate it if necessary. If there was a power failure, press the Start/Pause key to resume the program.
N
Nathan FrazierAug 26, 2025
Why are my clothes shrinking in my LG Dryer?
- D
  Donald WilkinsAug 26, 2025
  If your clothes are shrinking, felting, or deteriorating in your LG dryer, it's likely that the program you're using isn't suitable for the type of laundry you're drying. Check the care labels on your laundry items and select a program that is appropriate for the fabric type.
H
Heather HallAug 28, 2025
What to do if the water tank warning symbol is on my LG Dryer?
- C
  Cynthia OsborneAug 28, 2025
  If the water tank warning symbol is on or flashing on your LG dryer, the water tank is likely full; empty it. If your dryer is connected directly to a water outlet, inspect the water discharge hose for any bends that may be obstructing the flow.
W
Wanda AllenAug 31, 2025
How to turn off the filter cleaning warning symbol on LG RH80M2AV6R Dryer?
- J
  Jordan HayesAug 31, 2025
  To address the filter cleaning warning symbol on your LG dryer, start by cleaning the lint filter. If the symbol persists, the filter seat might be clogged, so clean that as well. Additionally, a layer of obstruction may have formed on the filter's surface; wash the filter with lukewarm water.
E
Emily HollowaySep 3, 2025
How to fix heat exchanger cleaning warning symbol on LG Dryer?
- J
  Jeffrey ReevesSep 3, 2025
  If the heat exchanger cleaning warning symbol is illuminated on your LG dryer, it indicates that the heat exchanger is unclean. Clean the heat exchanger to resolve this issue.
L
Lisa RobertsSep 6, 2025
Why is water leaking from the loading door of my LG RH80M2AV6R Dryer?
- K
  Kristin BlackSep 6, 2025
  If you notice water leaking from the loading door of your LG dryer, it's likely due to lint accumulation on the inner surfaces of the loading door and the gasket. Clean these surfaces to prevent further leakage.
R
Rebecca GomezSep 8, 2025
What to do if the LG RH80M2AV6R loading door opens by itself?
- A
  Alexandra HerringSep 9, 2025
  If the loading door of your LG dryer opens on its own, it might not be closed properly. Ensure you push the loading door until you hear it click shut.
J
Joshua ClementsSep 12, 2025
What to do if the LG RH80M2AV6R program can not be started and the filter warning led is blinking?
- M
  Miguel AllisonSep 12, 2025
  If the program cannot be started and the filter warning LED is blinking on your LG dryer, make sure the filter is placed correctly. Replace the filter. If the filter warning LED continues to blink even after the filter is placed, call technical service.