23
Setting the Clock
1. Turn the unit on.
2. Press and hold CLOCK on the remote control.
3. Select time mode by pressing
C/V
on the
remote control.
- AM 12:00 (for an A and P display) or 0:00
(for a 24 hour display).
4. Press RDS/SET on the remote control to confirm
your selection.
5. Select the hours by pressing
C/V
on the
remote control.
6. Press RDS/SET on the remote control.
7. Select the minutes by pressing
C/V
on the
remote control.
8. Press RDS/SET on the remote control.
Using your player as an alarm
clock
1. Turn the unit on.
2. Press and hold ALARM on the remote control.
3. Press
C/V
on the remote control to change
the hours and minutes and press RDS/SET on
the remote control to save.
4. Press
C/V
on the remote control to select
function and press RDS/SET on the remote
control to save.
- Press
C/V
on the remote control to select a
preset number when you select tuner and then,
press RDS/SET on the remote control.
If there is no preset number, this step is skipped.
5. Press
C/V
on the remote control to change
the volume and press RDS/SET on the remote
control to save.
y
If you set the clock time, you can check the
time by pressing CLOCK on the remote
control even when the player is turned off.
y
You can set alarm after you set the clock
time.
y
If you set the clock time and alarm, you
can check the alarm setting information by
pressing ALARM on the remote control even
when the unit is turned off.
y
You can select ALARM ON/OFF mode by
pressing ALARM on the remote control.
,
Note
RK1.DEUSLLK_WEB_ENG_MFL69940448.indd 23 2018-03-12 �� 4:29:10