16
OPERATION
Display
a
Operating Status Lamp
*1 The Clean Filter indicator lamp does not light
up starting from the corresponding product
manufacturing number (After Oct. 2021).
b
Forced Operation Button
Operates the appliance when the remote
control can't be used.
• Press the
b
button for about 2 seconds.
Auto Restart Function
When the appliance is turned on again after a
power failure, it restores the previous operation
settings and run in the same.
• This function is useful in the case of power
failure.
• This function is enabled by the factory default
settings.
• If you want to set or disable the auto restart
function, press and hold the Forced Operation
Button
b
for 15 seconds.
Color Description
Green
1) Cooling or Heating mode
2) Hot start or defrost mode
before starting heating
mode
Yellowish
Green
1) Time to clean the filter in
cooling or heating mode
*1
2) when reservations sets
are set.
Orange
Time to clean filter when the
product is not operating.
To Next Page
Loading...
