23
MAINTENANCE
ENGLISH
5
Lift the PM1.0 Filter slightly and remove it from
the appliance.
6
Remove the Deodorization Filter
e
by pressing
it up.
Cleaning the Air Filter
1
Clean the air filter with a vacuum cleaner or
wash it with lukewarm water and a mild
detergent.
2
Dry the filter in the shade.
Cleaning the PM1.0 Filter and
Deodorization Filter
PM1.0 Filter
1) Soak the PM1.0 filter in enough water to
submerge it and shake it several times to
clean it.
• Clean the filter without disassembling it.
• If it is heavily soiled, soak it in lukewarm
water with neutral detergent for 30
minutes, then rinse thoroughly with clean
water.
2) Dry in the shade for about a day.
• If you assemble the PM1.0 filter with
moisture remaining, 7 beeps will sound.
• Do not use hot water over 40
\
or volatile
liquids.
• Do not use acidic detergents such as citric acid.
• Drying with a hot air heater, such as a hair dryer
or a heater, could damage or deform the filter.
• The inside of the filter is sharp, so do not rub or
touch it directly.
To Next Page
Loading...
