Operating Instructions
The remote control transmits the signals to the system.
Remote Control Operation
1. OPERATION DISPLAY
Displays the operation conditions.
2. CHAOS SWING BUTTON
Used to stop or start louver movement and set
the desired up/down airflow direction
3. OPERATION MODE SELECTION BUTTON
Used to select the operation mode.
4. OFF TIMER BUTTON
Used to set the time of stopping opertion.
5. START/STOP BUTTON
Operation starts when this button is pressed, and
stops when the button is pressed again.
6. ROOM TEMPERATURE SETTING BUTTONS
7. INDOOR FAN SPEED SELECTION BUTTON
Used to set the time of starting and stopping
operation.
8. JET COOL
Used to start or stop the speed cooling (Speed
cooling operates super high fan speed ing
cooling mode.)
(1) Operation Mode
(2) Operation Procedure
To Next Page
Loading...
Need help?
General
