Press the Start/Stop button.
The unit will respond with a beep.
1
Press the Jet Cool button to operate the speed cooling
mode and the unit will operate in super high fan speed
on cooling mode for 30 minutes.
To cancel the Jet Cool mode, press the Jet Cool button
again or the fan speed button or the room temperature
setting button and the unit will operate in high fan
speed on cooling mode.
2
3
o
During the JET COOL function at any moment, the A/C starts to blow the cool air at extremely high
speed for 30 minutes setting the room temp. automatically to 18°C. It is especially used to cool the
room temp. in the shortest time in a hot summer. In heat pump mode the JET COOL function is not
available.
o
In order to return to the normal cooling mode from the JET COOL mode, you just press either the
operation mode selection button, airflow volume selection or temp. setting button or the JET COOL
button again.
To Next Page
Loading...
